Sunday, March 2, 2008

Over seat stearing conversion

I 've finally finished the coversion from underseat steering to the "Windcheetah" style overseat steering. The change was necesitated by my plan to put a floor and wheel wells into the fairing. The old handlebars would have hit the wheel wells every time I tried to turn. As you can see from the pictures I've bolted it all together just like the rest of the trike. I used 1.25" square tubing and a piece of tubing that's the same 7/8'' as handlebars.
The snow had melted off the road soI took it out for a test ride this afternoon. I didn't take it down a hill but I suspect I need to tighted the connection with the universal joint. There's some play in it. The other issue is that its prety hard to turn. The steering assembly is attached to the frame with a bolt that goes through a bushing on each side of the frame. Maybe some oil would help. The only other problem was that my rear derailer cable cought on the bit of bolt I didn't saw off fush with the nut.
The other advantage of this set up is that I had a chance to redo the steering linkage and hopefully improved the ackerman compensation. The old set up was off and an I went through tires about every 1000 miles. The turning radius dramticly improved. The old handle bars used to hit the seat limiting the turning circle to the width of my little street.
Posted by Picasa

Monday, February 18, 2008

Laser front end alignment

I spent the long weekend switching over from underseat stearing to Windcheetah style club steering, which of course means I needed to do a front end alignment. My system is copied from Larry Varney's friend and mechanic Walt Smith. Walt graciously did an alignment for me at the 2005 Bentride.
The system uses two magnetic laser torpedo levels. Idealy its a two person job with the rider sitting on the trike (there's a little frame flex in all trikes). The other person lines up the targets first very close to the lasers and then again 20' to 30' away. I've found that an inch of toe in at 20-30 feet works pretty well.
Posted by Picasa

Saturday, December 8, 2007

Do It Yourself LED Headlamp

I stumbled upon this cool DIY LED headlight last night. Allen Chapman, the do it yourselfer who came up with it has done a really good job documenting how he built it and where he bought the parts. Light output wise it compares to the $400 to $500 high end lights. It looks like a fun winter project and I like the square tube look. It goes with the trike.

Wednesday, November 7, 2007

An Inconvenient Truth

I rode over to Bantam Bakery in Plainville this evening for a showing of Al Gore's movie, An Inconvenient Truth. The showing was organized by the Plainville Greenway Alliance and the Plainville Conservation Commission. They had a good crowd and you can't beat Bantam Bakery for snacks.

In order to do the ride I had to get the trike's lighting system set up. I'm running a 20w Halogen headlight off of a 12 motor cycle battery. Like the rest of the trike its a home built set up. The light is actually a car fog light with a white bulb rather than the yellow that it came with. For visibility I'm also using a planet bike strobe mounted mid way up my flag pole. A 5 LED red light on the back of the fairing and just for added 360 degree visibility a xenon strobe at the top of my flag pole. I runs off of a 9 volt transistor radio battery. Finally I've mounted a headlamp to the visor of my helmet which I usually run in the flashing mode. Over kill you say? I was glad to have some extras as I watched the front headlight dim to dull glow as the battery ran down. Maybe someone will get me that killer LED headlight I saw over at REI for Christmas (Hint, Hint).



So watching the Nobel Prize winner's movie it's really hard not to think about how much different this country maybe the world would be if the supreme court hadn't given W the presidency.

Calculate your carbon foot print with the handy online tool on the Inconvenient Truth web site.

Obviously the more you can leave the car a home and walk, ride or take the bus the smaller your footprint will be.

Wednesday, August 29, 2007

Bentride 2007

This past weekend was the annual BentriderOnline.com Bentride in Hammondsport NY.
The Glen Curtis museum played host to the festivities. Curtis, if you're not familiar with him, was a motorcycle pioneer who used his knowledge of engines to also become a well know builder of airplanes. In the picture you can see a bunch of us test riding recumbents beneath a sculpture of one of Curtis's early planes.








Here are some of the gang who came from far and wide for the Saturday expo and Sunday ride.
My velomobile attracted quite a bit of attention. Here's Bentrider's Mr. Trike himself, Larry Varney taking it for a spin.



After the expo, a bunch of us rode to lunch in Bath. What was that about there being a stereotype that recumbent riders are all old men with beards and aerobellies. OK maybe there are a couple guys who fit the description.




There were two other velomobiles in attendance. In this picture John Tetz (white shirt) builder of the zote foam velomobile talks with Krash, builder of the VeloKit (pictured in the second picture)
All in all it was another great recumbent weekend. The weather Sunday was perfect for the 47 mile ride around Lake Keuka. Thanks again to Bryan Ball at BendriderOnline for organizing it.Posted by Picasa



Wednesday, August 22, 2007

Bentride this weekend

I'm looking forward to the annual Bentride around Kukla Lake in NY this weekend. Bryan Ball, publisher of Bentrideronline.com organizes this event each year. This year I'll be heading out with my friend Mike. We haven't finished building his trike yet, but it will be a great opportunity to check out the new trikes and other people's homebuilts.

Monday, June 25, 2007

A great week end

Saturday I dropped my daughter off for her first day of her summer job as a life guard and went in to Hartford to hear Bill Moyers and Barak Obama at the 50th annual synod of the United Church of Christ. They were great. An intelligent, thought provoking, motivating speech from a presidential candidate. What a concept!

Having done my church thing on Saturday, Sunday was for cycling. Newington Bicycle held their 2nd annual recumbent trike rally. Mike Gallagher put together a nice ride and good food. There were 8 of us who rode including Mike and his wife on their Greenspeed tandem, Franny Yerkes on her ICE trike, Alex (my trike building apprentice from last summer) and a woman doing her first trike ride on a borrowed Greenspeed gt3s, John (I think) on a HP Scorpion trike and John Tetz and I in our home built velomibiles.

John has just fitted his zote foam velomobile with a 4 1/2 lb homebuilt electric assist system which he kept talking about as still being in the test phase. Well John, when a 75 year old guy passes me with ease going up a hill, I'd say the test is successful. John and I had lots of fun racing down the hills. The aerodynamics of velomobiles make it easy to leave everyone else in the dust. I set a new speed record for my velomobile at 47.4 miles per hour coming down the hill into Newington at the end of the ride. That front end alignment I did a little while ago made all the difference in the world. At 47+ mph the trike was rock steady.

After the ride I had arranged to meet up with my new friend Mike, one of the blog readers who had contacted me about building a trike/velomobile. We had planned out a rear suspension trike with 20" BMX wheels all around. Knowing that Mike has been spending a lot of time reading everything he could about trike construction on internet I knew he would be excited to see John's zote foam velomobile. Over lunch at the end of the ride I asked John if he wouldn't mind stopping by my house. Three homebuilders talking trikes, it was great fun. I know I eagerly awaiting John's write up of the power assist.